How to make water for soap bubbles. How to make soap bubble liquid. Recipes on how to make a solution for soap bubbles at home

Summer is in full swing - and you want something like that ... To be fun, simple and - to have a sea of ​​​​real summer sensations! One of the great options is soap bubble festival . Yes, yes, a holiday: any, even the most boring, evening with soap bubbles turns into an adventure. It's fun and beautiful, plus - new sensations, new observations, new discoveries ...

Oh, soap bubbles!

You can spend a quiet evening of experiments, you can have a fun competition, or you can have a noisy pampering for kids ... By the way, how many adults can pass by children who let bubble, and not show "class"?

Today we have prepared for you 7 recipes for making soap bubbles at home . But you can use them in yard conditions, and in summer cottages, and in parks, and in holidays, and in walking, and even in the conditions of playing in a laboratory for studying the properties of soap bubbles!

What is important to know in order to make soap bubbles at home Good?

Of course, the main thing is the solution and what sticks (tubes, frames) for soap bubbles you use. Below we give 7 recipes for soap bubble solution. You can choose the one that suits you best, but do not be surprised: you may have to "tailor" it to your conditions. Let some helpful tips help you.

The best children's books

Useful tips for those who make soap bubbles at home:

  • It is better to use boiled water to prepare the solution, and even better - distilled.
  • The less impurities (perfume and other additives) in the soap or other detergent used to prepare the liquid, the more reliable the result.
  • How to make the solution denser, and the quality of soap bubbles better? To do this, use glycerin or sugar dissolved in warm water.
  • The main thing is not to overdo it with glycerin and sugar, otherwise it will be difficult to blow bubbles.
  • A less dense solution forms less stable bubbles, but they are easier to blow out (suitable for babies).
  • Many bubble buffs advise letting the solution sit for 12 to 24 hours before drinking.
  • At the start, before blowing the bubble, you need to wait for a clean solid film (on which you will blow), without additional small bubbles around the edges that sometimes occur. Bubbles must be carefully removed or wait until they disappear. And in general, it is desirable to avoid foam: insist, cool the liquid for soap bubbles - if only there was less foam.
  • Wind and dust in the air are not helpers for soap bubbles.
  • High humidity is a helper.

How to make a solution for soap bubbles: 7 recipes for all occasions

Recipe 1, simple: soap bubbles from dishwashing liquid

You will need:

Mix all ingredients thoroughly. Ready!

You can use a similar composition, where glycerin is used instead of sugar:

  • 2/3 cup dishwashing liquid
  • 4 glasses of water
  • 2-3 tablespoons of glycerin.

Thoroughly mix all the ingredients and put the mixture in a cool place for 24 hours. Glycerin can be purchased at any pharmacy.

To do colorful soap bubbles , add to mixture food coloring(2-3 teaspoons for the whole volume or divided into parts to make bubbles of different colors).

Recipe 2, for the little ones: how to make soap bubbles from baby shampoo?

You will need:

  • 200 ml baby shampoo,
  • 400 ml of distilled (boiled, melted) water.

This liquid should be infused for a day, after which you should add:

  • 3 tablespoons of glycerin or 6 teaspoons of sugar.

Recipe 3, Fragrant: Bath Bubbles

You will need:

  • 3 parts bath foam
  • 1 part water.

Recipe 4, original: soap bubbles with syrup

You will need:

  • 2 cups dishwashing liquid
  • 6 glasses of water
  • 3/4 cup corn syrup

Recipe 5, cheap and cheerful: solution for soap bubbles from laundry soap

You will need:

  • 10 glasses of water
  • 1 cup grated laundry soap
  • 2 teaspoons of glycerin (or a solution of sugar in warm water, you can - with gelatin).

You can get by with a combination of water and soap without additional additives (for example, if there is simply no glycerin). Soap grated on a grater should be poured into boiled water, and hot, and stirred to full soap dissolution. If the dissolution is difficult, you can slightly warm the mixture with continuous stirring. Do not bring to a boil!

And if you do not want to grate laundry soap, then use this composition:

  • 100 ml liquid soap
  • 20 ml distilled water,
  • 10 drops of glycerin (after the foam settles, i.e. after about 2 hours. It is better to infuse the liquid in a cold place).

Recipe 6: extra strong soap bubbles for experimenters

You will need:

  • 1 part concentrated sugar syrup(proportion: for 1 part of water 5 parts of sugar: for example, for 50 g of sugar - 10 ml of water),
  • 2 parts grated soap
  • 4 parts glycerin
  • 8 parts distilled water.

With this solution, you can, for example, build various figures from soap bubbles by blowing them onto a smooth table surface.

Recipe 7: giant soap bubbles for a children's party

You will need:

  • 50 ml glycerin,
  • 100 ml dishwashing liquid,
  • 4 teaspoons of sugar
  • 300 ml of water.

A solution for giant soap bubbles can be prepared in a basin, and they are “blown out” using a gymnastic hoop or a frame specially twisted from a flexible material. Honestly, you don’t have to blow - rather, you have to wave the frame or slowly pull a large, strong bubble out of the basin.

Giant soap bubbles on the beach (video):

What to blow? Tubes/frames/sticks for soap bubbles

As sticks for soap bubbles, you can use tubules of different diameters, frames, cocktail sticks (especially with a cross-shaped or fringed tip and bent “petals”), hollow blades of grass or pasta, dough cutters, funnels, you can buy at the store special guns for soap bubbles or just blow them through your fingers! 🙂

And if you are invited to a real soap bubble festival or arrange one for yourself, you can make original stick-frames with your own hands from wire and colored beads, for example, these:

Another one original idea— use for blowing big soap bubbles… !

Soap bubbles show

And finally - see how beautifully and unusually soap bubbles are used in theatrical shows.

You can give a holiday and fun to children without significant costs. We make soap bubbles with our own hands!

Giving children a holiday is easy!

One of the most fun, romantic, simple and exciting things to do is soap bubbles. Moreover, this fun will captivate children and adults, in winter and summer, at home, in the yard and outside the city, and one child, and a large company of different ages. What is especially nice is that you can buy a bottle with a solution for soap bubbles inexpensively, and making your own homemade soap bubbles is even easier. And quickly and in any volume.

Making soap bubbles at home is easy! The main components of the solution are water, soap, glycerin or sugar. But it is important to follow some recommendations that will allow you to prepare such a solution for soap bubbles that the balls will be blown easily, large and will not burst in the next few seconds.

- to prepare the solution, it is better to use not tap water, but boiled, and even better - distilled. There are a lot of salts in tap water, and the less impurities in the components of the solution, the better quality soap film;

- for a greater density of the solution, and therefore, greater strength of future balls, use glycerin or sugar. Liquid glycerin in a pharmacy can be bought for 13 rubles;

- when making homemade soap bubbles, do not overdo it with glycerin / sugar, otherwise the solution will turn out to be dense and the bubbles will be difficult to blow;

- less stable bubbles are blown out of a less dense solution, but they are blown out easily, which is optimal for babies;

- if possible, soak the finished solution for 12-24 hours, and only then start! Some specialists for best quality bubbles are advised to keep the solution in the refrigerator. During this time, the foam will settle - it is not needed in the solution;

- wind and dust are the enemies of soap bubbles;

- high humidity - an assistant.

Soap bubbles are easy to make with your own hands

From laundry soap

You will need:

10 glasses of water

1 cup grated laundry soap

2 teaspoons of glycerin (or a solution of sugar in warm water, gelatin can be added).

Grate the soap, pour it into hot boiled water and stir until completely dissolved. If dissolution is difficult, heat the mixture while stirring continuously. Do not bring to a boil!

Instead of household soap, you can use olive or almond oil soap, but not any perfumed toilet soap - there are additives that are unnecessary in this case.

From liquid soap

You will need:

100 ml liquid soap

20 ml distilled water,

10 drops of glycerin.

Mix soap and water, wait for the foam to settle (this will take approximately 2 hours), then add the glycerin. Let the solution brew, preferably in a cold place.

From dishwashing liquid

You will need:

1/2 cup dishwashing liquid (not for dishwashers!),

2 glasses of water

2 teaspoons of sugar.

Mix all ingredients thoroughly. Ready! Instead of sugar, you can use 1-2 tablespoons of glycerin. And if you put the solution in the refrigerator for a day, the bubbles will turn out notable!

From baby shampoo

You will need:

200 ml baby shampoo,

400 ml of distilled (boiled) water.

3 tablespoons of glycerin or 6 teaspoons of sugar.

The mixture is infused for a day, after which glycerin (or sugar) should be added.

From sugar syrup - for experiments

You will need:

1 part concentrated sugar syrup (proportion: to 1 part of water 5 parts of sugar: for example, for 50 g of sugar - 10 ml of water),

2 parts grated soap

4 parts glycerin

8 parts distilled water.

With this solution, you can, for example, build various figures from soap bubbles by blowing them onto a smooth table surface.

For children's party

You will need:

50 ml glycerin,

100 ml dishwashing liquid,

4 teaspoons of sugar

300 ml of water.

From these ingredients you can "blow" giant soap bubbles. The solution can be prepared in a basin, and “blow out” them using a gymnastic hoop or a frame specially twisted from wire. You don’t even have to blow, you just have to swing the frame or slowly pull a large, strong bubble out of the basin with the same frame or hoop.

From washing powder

You will need:

3 cups hot water

2 tablespoons of powder

20 drops of ammonia

The solution should be infused for 3-4 days, then it must be filtered. It will take time, of course, but knowledgeable people they assure that the bubbles from such a solution are large and beautiful, as in the show.

Large (from 1 meter in diameter) bubbles

Recipe #1

0.8 l of distilled water,

0.2 l dishwashing detergent,

0.1 l of glycerin,

50 g sugar

50 g gelatin.

Soak gelatin in water, leave to swell. Then strain and drain off excess water. Melt the gelatin with sugar without boiling. Pour the resulting liquid into 8 parts of distilled water, add the remaining ingredients and mix without foaming. This solution produces particularly large and firm blisters and is non-toxic.

Recipe number 2

0.8 l of distilled water,

0.2 l of thick dishwashing detergent,

0.1 l of lubricant gel without impurities,

0.1 l of glycerin.

Mix gel, glycerin and dishwashing liquid. Add hot distilled water and mix thoroughly without creating foam. From such a solution, especially “tenacious” bubbles are obtained that do not burst even when in contact with water.

Soap bubbles are a simple, fun and exciting entertainment that is loved not only by children, but also by adults. Therefore, many are interested in how to make soap bubbles at home. You can make blister fluid at no major cost and in almost any quantity. There are many ways to prepare the composition with your own hands. Consider some of them, and you will choose your favorite recipe.

Classic recipe

Ingredients:

  • 500 ml of water;
  • 50 g of laundry or glycerin soap without fragrances and dyes;
  • 2 tablespoons of glycerin.

If you do not have the last component at home, then a jar of glycerin can be bought at almost any pharmacy. First grind the soap by grating or finely chopping. Pour hot water over it and stir until completely dissolved. If the soap does not dissolve well, you can slightly warm the water, stirring it constantly. But do not bring the solution to a boil! If necessary, strain the composition through cheesecloth. After that, it remains to add glycerin to the soap solution.

It's pretty simple and affordable recipe. You will most likely find all the components in your kitchen. Plus, you don't have to wait for the soap to dissolve.

Required Ingredients:

  • 400 ml of water;
  • 100 ml dish detergent;
  • 2 teaspoons of regular white sugar.

It is better to take ordinary dishwashing liquid without dyes and flavors. Dishwasher detergent is not suitable. So, to prepare a solution for soap bubbles, add dish detergent and sugar to warm water. After that, mix the ingredients well. Everything, the solution is ready!

Washing powder solution

It will take you several days to prepare a solution with the addition of washing powder. Therefore, if you want to please yourself and your child right now, this recipe will not work for you.

You will need the following ingredients:

  • 300 ml of water;
  • 100 ml of glycerin;
  • 8-10 drops of ammonia;
  • 20-25 g of washing powder.

Add to hot water washing powder and stir until completely dissolved. Then add the rest of the ingredients. The resulting soap solution should stand for about 2 days. After waiting a couple of days, strain the solution and refrigerate for several hours (or overnight). After that, the composition will be ready for use.

Bubble recipe for toddlers

It happens that while playing with a child, drops from bursting bubbles get into the eyes. And then entertainment does not bring any joy. Liquid with the addition of mild baby shampoo, getting on the mucous membranes, does not cause pain and burning in the baby. How to make soap bubbles at home for the little ones?

Required Ingredients:

  • 500 ml of water;
  • 200-250 ml of baby shampoo;
  • 3 tablespoons of granulated sugar.

Dissolve the shampoo in warm water. The prepared liquid should brew a little. Leave the solution overnight, or better - for a day. Then add sugar to the mixture and mix everything well. The bubble solution is ready.

Recipe for Extra Strong Bubbles

If you want to get non-popping bubbles, you will need the following components:

  • 800 ml of water;
  • 350-400 ml of glycerin;
  • 200 g of laundry soap;
  • 80 g sugar.

Rub the soap and pour the resulting shavings with hot water. Stir the liquid until the soap is completely dissolved. After that, add sugar and glycerin to the mixture and mix everything thoroughly again. From the resulting solution, you can make not only strong bubbles, but also various soap figures, for example, by blowing balls onto a smooth table.

Original recipe: solution with syrup

Corn syrup can replace sugar or glycerin. To prepare the solution you will need:

  • 600 ml of water;
  • 200 ml of shampoo or dish liquid;
  • 70-80 ml corn syrup.

The recipe for this composition is very simple: you just need to add syrup and dishwashing detergent to water, and then mix everything well.

Checking the quality of soapy liquid is easy: inflate the bubble, dip your finger into the foam and gently touch the bubble with it. If the ball burst, then it is worth adding more a large number of glycerin or sugar. If the bubbles are difficult to inflate and are too heavy, add a little water to the solution. If the bubbles inflate well and do not burst, then the solution is prepared correctly, nothing else needs to be added to it.

Recipe for the preparation of the composition for large bubbles

Various soap bubble shows are now very popular, which can be seen at weddings, birthdays and other festive events. You can also arrange such a show for children or friends.

To prepare the composition with your own hands, you will need the following ingredients:

  • 800 ml of water;
  • 200 ml of dishwashing detergent;
  • 150 ml of glycerin;
  • 50 g of granulated sugar;
  • a bag of gelatin (30-40 g).

Before making soap bubbles, it will be necessary to prepare the gelatin. Soak it in a small amount water (read the recipe on the bag) and leave to swell, then strain. Mix gelatin with sugar and melt the mixture without boiling it. This can be done in a water bath or in a microwave oven. In 800 ml of warm water, add the resulting mixture of gelatin and sugar, and then the rest of the ingredients. After that, it remains to mix everything thoroughly.

The solution can be prepared in a wide basin. And they form giant bubbles using a hoop or a large frame made of flexible material. True, you do not have to blow the balls. Just dip the frame into the liquid and gently pull out the big bubbles.

If you want good bubbles that won't pop while blowing, consider the following guidelines.

  1. To prepare the solution with your own hands, it is recommended to use not tap, but boiled or bottled water.
  2. When choosing soap, dishwashing detergent or powder, pay attention to the composition. The less dyes and perfume additives will be in the product, the better the bubbles will turn out.
  3. Glycerin, like sugar, affects the density of the solution and the strength of the blown balls. But do not abuse the glycerin, otherwise the solution will be too dense and the bubbles will be difficult to inflate.
  4. Bubbles obtained from a less dense solution are not as strong, i.e., they burst faster. But they are much easier to blow out. Therefore, this composition is more suitable for kids.
  5. If possible, keep the prepared solution in the refrigerator for 1-2 days before use.
  6. Before inflating, it is necessary to wait until there is a solid film on the surface of the solution without foam and bubbles. The foam can be removed or wait until it disappears on its own. Cooling the liquid is the easiest way to get rid of unnecessary foam.
  7. Blow the balloon slowly and evenly, otherwise the soap film will quickly tear and the bubble will burst.

Optimal conditions

If you are blowing soap bubbles outdoors, get ready for the fact that the result will largely depend on the weather. Strong wind and dust are the real enemies of bubbles. Also, they should not be allowed on a dry and hot day when the air temperature exceeds 25 degrees. But high humidity, on the contrary, will be an excellent assistant in the "soap" business. It is believed that the best results are obtained in the morning or evening after rain or watering the lawn.

If you are blowing bubbles at home, then avoid strong drafts. Also, the room should not be too hot, dry and dusty. It is important to consider: in some cases, bubbles, bursting, can leave marks on parquet, linoleum or furniture.

In many ways, the size and quality of bubbles depend on the tools that are used for blowing. Today it is easy to find many ready-made tools in the store. different forms and sizes. But you can make them yourself. For example, a wire twisted with a loop is perfect for these purposes. Some use a plastic bottle with a cut off bottom or shaped dough molds. You can also use a straw for cocktails. And to make the balls larger, several longitudinal cuts can be made at the end of the tube.

Safety regulations

  • When working with the solution, be careful: it should not get into the eyes, nose and mouth.
  • If you made bubbles for a baby, make sure that he does not taste the solution.
  • Blow soap bubbles in a direction where there are no people or animals.
  • If splashes from the bubble do get into your eyes, rinse them thoroughly with clean, running water.
  • After preparing the composition and experimenting with soap bubbles, do not forget to wash your hands under running water.

If you want to give a holiday to your child or just to cheer up your loved ones, use one of the recipes presented. As you can see, you can make beautiful bubbles with your own hands without much effort and serious costs.

You can spend a quiet evening of experiments, you can have a fun competition, or you can have a noisy pampering for kids ... By the way, how many adults can walk past children blowing soap bubbles and not show "class"?

What is important to know in order to make soap bubbles at home Good?

Of course, the main thing is the solution and what sticks (tubes, frames) for soap bubbles you use. Below we give 7 recipes for soap bubble solution. You can choose the one that suits you best, but do not be surprised: you may have to "tailor" it to your conditions. Let some helpful tips help you.

The main secret of success!

The main condition for preparing a good solution is the use of high-quality water. If the water is too hard, the solution will be of poor quality: the bubbles will be small or they will not be blown out at all. We advise you to take drinking non-carbonated or filtered water. Good solutions are obtained on boiled or melted water. By using good water, you multiply your chances of success many times over!

Useful tips for those who make soap bubbles at home:

  • The less impurities (perfume and other additives) in the soap or other detergent used to prepare the liquid, the more reliable the result.
  • How to make the solution denser, and the quality of the bubbles better? To do this, use glycerin or sugar dissolved in warm water.
  • The main thing is not to overdo it with glycerin and sugar, otherwise it will be difficult to blow bubbles.
  • A less dense solution forms less stable bubbles, but they are easier to blow out (suitable for babies).
  • Many bubble buffs advise letting the solution sit for 12 to 24 hours before drinking.
  • At the start, before blowing the bubble, you need to wait for a clean solid film (on which you will blow), without additional small bubbles around the edges that sometimes occur. Bubbles must be carefully removed or wait until they disappear. And in general, it is desirable to avoid foam: insist, cool the liquid for soap bubbles - if only there was less foam.
  • Wind and dust in the air are not helpers for soap bubbles.
  • High humidity is a helper.

Solution for soap bubbles: recipes for all occasions

Classic solution of soap bubbles according to GOST

It was this recipe for soap bubbles that was used according to GOST to prepare a solution during our childhood.

Ingredients:

  • Purified water - 100 grams
  • Laundry soap or glycerin (unflavored) - 10 grams
  • Glycerin pure - 20-30 grams

Cut or rub soap. The soap should completely dissolve. Flavored varieties of soap cannot be used, it is necessary to use household or pure glycerin without additives. Strain the solution through cheesecloth.

Add glycerin to the mixture. First you need to add 20 grams, and try to blow bubbles, and if they do not work out, another 20 - 35 grams of glycerin is added to the mixture. Glycerin is needed in its pure form - the cream cannot be used. It’s hard to do without glycerin - the bubbles will turn out to be “dry”, which will make them burst faster.

Recipe 1, simple: soap bubbles from dishwashing liquid

You will need:

  • 1/2 cup dishwashing liquid
  • 2 glasses of water
  • 2 teaspoons of sugar

Mix all ingredients thoroughly. Ready!

You can use a similar composition, where glycerin is used instead of sugar:

  • 2/3 cup dishwashing liquid
  • 4 glasses of water
  • 2-3 tablespoons of glycerin.

Thoroughly mix all the ingredients and put the mixture in a cool place for 24 hours. Glycerin can be purchased at any pharmacy.

To do colorful soap bubbles , add food coloring to the mixture (2-3 teaspoons for the entire volume or divide into parts to make bubbles of different colors).

Recipe 2, for the little ones: how to make soap bubbles from baby shampoo?

You will need:

  • 200 ml baby shampoo,
  • 400 ml of distilled (boiled, melted) water.

This liquid should be infused for a day, after which you should add:

  • 3 tablespoons of glycerin or 6 teaspoons of sugar.

Recipe 3, Fragrant: Bath Bubbles

You will need:

  • 3 parts bath foam
  • 1 part water.

Recipe 4, original: soap bubbles with syrup

You will need:

  • 2 cups dishwashing liquid
  • 6 glasses of water
  • 3/4 cup corn syrup

Recipe 5, cheap and cheerful: solution for soap bubbles from laundry soap

You will need:

  • 10 glasses of water
  • 1 cup grated laundry soap
  • 2 teaspoons of glycerin (or a solution of sugar in warm water, you can - with gelatin).

You can get by with a combination of water and soap without additional additives (for example, if there is simply no glycerin). Soap grated on a grater should be poured into boiled water, and hot, and stirred to full soap dissolution. If the dissolution is difficult, you can slightly warm the mixture with continuous stirring. Do not bring to a boil!

And if you do not want to grate laundry soap, then use this composition:

  • 100 ml liquid soap
  • 20 ml distilled water,
  • 10 drops of glycerin (after the foam settles, i.e. after about 2 hours. It is better to infuse the liquid in a cold place).

Recipe 6: extra strong soap bubbles for experimenters

You will need:

  • 1 part concentrated sugar syrup (proportion: to 1 part of water 5 parts of sugar: for example, for 50 g of sugar - 10 ml of water),
  • 2 parts grated soap
  • 4 parts glycerin
  • 8 parts distilled water.

With this solution, you can, for example, build various figures from soap bubbles by blowing them onto a smooth table surface.

Recipe 7: giant soap bubbles for a children's party

You will need:

  • 50 ml glycerin,
  • 100 ml dishwashing liquid,
  • 4 teaspoons of sugar
  • 300 ml of water.

A solution for giant soap bubbles can be prepared in a basin, and they are “blown out” using a gymnastic hoop or a frame specially twisted from a flexible material. Honestly, you don’t have to blow - rather, you have to wave the frame or slowly pull a large, strong bubble out of the basin.

What to blow? Tubes/frames/sticks for soap bubbles

As sticks for soap bubbles, you can use tubules of different diameters, frames, cocktail sticks (especially with a cross-shaped or fringed tip and bent “petals”), hollow blades of grass or pasta, dough cutters, funnels, you can buy at the store special guns for soap bubbles or just blow them through your fingers!

And if you are invited to a real soap bubble festival or arrange one for yourself, you can make original stick-frames with your own hands from wire and colored beads, for example, these:

Another original idea - use it to blow large soap bubbles ... plasticnew bottles !

If you have your own ways to make soap bubbles at home or articles on the topic (especially with photos!) - please share them in the comments!

It is the use of glycerin that thickens the walls of the bubble and makes them more durable. As a result, the ball does not burst much longer. Another secret that prolongs the life of a soap bubble is the use of sugar. Just one spoon is enough and the balls do not evaporate so quickly.

Multiple Recipes

So, the first production soap solution for balls. He is the simplest. We take in equal parts glycerin, dish detergent and water. Mix everything well and use a straw to inflate large soap balls.

For the second method, we need a large container (preferably a deep bowl). Pour 3/4 of water into it and add 1/4 of regular shampoo. In the prepared product, add glycerin (2 tablespoons) and sugar (1 teaspoon). We mix the resulting mixture well and enjoy the large soap balls that we made ourselves. The number of balls will not be too large, but their size and "volatility" will pleasantly surprise you.

There is another way to make your own soap bubble liquid. To do this, mix 3 parts of water, 50 ml of glycerin and 1 part of liquid dish detergent. We thoroughly mix all the components of our “drug” and rejoice in our own soap fireworks. There will be a large number of balls, but they will be less durable than in the previous recipe.

To prepare a soap solution in the fourth way, you need to mix 200 ml of the most common shampoo with 400 ml of boiled water. The prepared mixture must be left for at least a day. Then add 3 tbsp. tablespoons of glycerin Our solution is ready.
The next method is quite simple and cheap. To a glass of warm boiled water, add 100 ml of shampoo and 3 tbsp. spoons of sugar.

Another cooking method involves the use of another component, namely liquid soap or shower gel. Mix equal amounts of shampoo, liquid soap and dish detergent. Then add half the water. As a result, we will get a large number of bubbles, and quite large ones at that.

Another interesting way

The next method requires more time, but the bubbles do not burst longer. Pour 1/3 of water, 1 part of glycerin and 10 drops of ammonia into a deep container. In another bowl, grate 50 g of laundry soap on a coarse grater. Put on fire and stir until completely dissolved. Pour into the first container, mix thoroughly. The resulting mixture must be allowed to brew for several days. After that, it is filtered and put in the refrigerator for half a day.

However, dear parents, remember that in the manufacture of the above solutions, substances are used that, if swallowed, can cause serious harm to human health and even human life. Therefore, in order for the joy of new interesting discoveries not to be overshadowed by negative consequences, please control your children in the process of using these funds.

Whichever way you choose to make soap bubble liquid at home, blowing soap bubbles made by yourself will bring a lot of positive emotions to you and your children. Therefore, act, experiment, go on an exciting journey to your childhood, and bring unforgettable moments of joy to yourself and your loved ones.