Soup boiled beef
Frozen beef (rump Brazil article 337375 - Metro Cah & Carry) - 25 kg, cut with a saw into pieces of 3 kg. Divide into HDPE bags (black trash bags), seal tightly and place in washing baths. Pour water from the tap at a temperature of 25 ° C. Check the temperature with an immersion thermometer. For two to three hours, change the water in the bath. After complete defrosting, place the pieces of meat in a 2/1 gastronorm container with a depth of 400 mm and pour the containers with MAITREFOODS meat softener article 10324 in the amount of 3 grams per 1 kg. Half an hour after treatment with maltodextrin, place the meat in stove-top boilers with water in the proportion of 3 parts of water to 1 part of meat, bring to a boil and cook for 5 hours at a temperature of 75 ° C. Determine the temperature with a thermometer. After cooking, let the meat cool in the broth. After reaching a temperature of 20 ° C, pack the meat with the broth in portions in vacuum bags 250 * 400 mm 65 microns in size, sealing them with a cartridge method of 50-60 grams using a CAS sealer model CNT-400. After sealing, the bags are placed in a hotplate pot or gastronorm container with a sous-vide thermostat and processed at a temperature of 85 °C for 10 minutes. Then the bags are removed and placed in an ice bath or gastronorm container (water / ice ratio - 50/50). Ice bath temperature = +1 °C. During the cooling process, it is necessary to add ice, because. the temperature in the bathroom will rise because the bags are hot. The cooling cycle is at least 30 minutes. After the end of pasteurization, the packages are wiped dry with a rag and marked with a labeling gun. The label should contain the date of production, the serial number of the cook-producer, the date of expiration of the expiration date. The shelf life of meat is 4 days. Place of storage - medium temperature chamber at a temperature of +2 °C.
borscht broth
Fry the bones in a saucepan with the addition of vegetable oil until golden brown. IN cold water put chicken bones, pork and dill roots. Peel the bell pepper, chop coarsely and put in the broth. Grate the garlic, wrap in gauze and put in the broth. Simmer for 3 hours on low heat, then add vinegar, paprika and hot peppers. Bring the broth to taste and strain through cheesecloth.
Pampushki with sauce
Mix all the ingredients in a bowl or in the bowl of a planetary mixer. Knead for 15 minutes at low speed in a planetary mixer or dough mixer. Roll into balls of 30 grams and put in a deep cast iron pan, as in the photo, lubricated with vegetable oil. Brush with milk. Bake at 180 C in a combi oven or convection oven for 20 minutes.
To prepare the sauce - mix finely chopped garlic, salt, vegetable oil and water.
Beet kvass
Dilute beetroot juice with water in a proportion of ¼. Boil. Cool down. Add sugar, salt, citric acid in a proportion of 1/10 of the volume of the emulsion. Let cool. Pour into ice packs. Freeze in a shocker for 120 minutes. Remove for storage in the freezer.
The popularity of catering points will never go out, because human laziness and love for food are eternal. Indeed, not everyone, having desired the Stolichny salad, Kiev cutlet and Prague cake for dessert, can afford to break into the store in order to purchase everything you need and lock yourself in the kitchen, cooking for several hours. The harsh reality with work, traffic jams and fatigue dictates its own rules, but you want to eat deliciously. For many years, enterprising people have been successfully earning on these human weaknesses, who have managed to build a serious business in a successful kitchen. How to make a calculation for a dish in the dining room so as not to work in the negative, or, conversely, not to scare away potential customers with exorbitant prices? At the same time, golden hands are not enough for success, because the market and competition dictate their own rules. It would seem - a dining room and a dining room, what can you earn there? However, people's attachment to the classics, when they were still preparing according to the "Book of Tasty and healthy food"Worth a lot.
On fingers
To tell the truth, at the moment the output of the cost is overestimated, since it is more logical to form the final price of a menu item based on people's tastes, demand and average market requests, however, for internal cost tracking and cost equalization, dish costing is still recommended.
For example, let's take one of the now popular French confectioneries: the company uses high-quality raw materials with an appropriate price tag, uses special equipment for the preparation of its products, which is very expensive (for example, the same fully automated chocolate tempering machine - you can’t save on it). succeed, as this is fraught with failures and damage to expensive resources), rents the premises of the required area, and so on and so forth. The calculation of dishes is at a glance, but they cannot reduce costs, as the quality, name and, as a result, demand will suffer, so you have to keep the bar. They also cannot set a uniformly high mark-up on those positions that are expensive in themselves, and those 300% of the cost that is on the lips of the population are simply swept aside. So what to do? Consider the menu that the confectionery offers:
- yeast baking;
- cakes and pastries;
- marshmallow candy.
The first and third positions in terms of cost, if not a penny, then close to it, while even half of the cakes cannot be “cheated” because of expensive resources. Therefore, the second position is sold significantly cheaper, and the difference is made up by buns and sweets. Moral: The calculation of the cost of a dish is not always based on the purchase prices of its components.
Of course, a pastry shop is different from a canteen, but the principle of working with final food products is similar.
Where to begin?
Those who are especially lazy can use ready-made online templates that can be found everywhere on the net, but they are too general and rather rough in the calculation. It would be more correct to once independently deduce prices and stick to them in the future, adjusting based on demand. In order to display the correct calculation of a dish in the dining room, you must have on hand:
- a completed menu, which will indicate the list of dishes provided by the catering point;
- technological maps for each menu item;
- purchase prices of all products that are involved in the preparation of menu items.
Menu
A word of advice: when choosing dishes in the dining room, do not overdo it. The very definition of this catering point implies simple, artless food that can evoke nostalgia for the times of the Union. In other words, no sushi. Yes, and the preparation of a calculation of dishes from the abundance of complex positions will become, if not more problematic, then certainly more boring. It is difficult to maintain a list as thick as an encyclopedia, both on a professional and material level, since it is difficult to find universal chefs in the dining room, and it is expensive to maintain the desired composition of products on an ongoing basis.
Technological cards
This term is understood as a document that contains information about all the features of the dish. It includes the following data (not necessarily all, part is selective):
- The term and specifics of the storage of the dish. Conventionally: ice cream at a temperature of -18 ... -24 ° C is stored for 3 months, while bread, at a temperature of +20 ... +25 ° C, is stored for 72 hours;
- nutritional value of the finished dish: the number of calories, in some cases - the ratio of proteins / fats / carbohydrates;
- requirements for the implementation and serving of the finished dish;
- directly the recipe itself, which includes the composition and cooking algorithm;
- recipe source;
- description of the appearance, the principle of decorating the dish;
- the weight of the finished portion.
It is impossible to neglect the technological map, since the principles of work "maybe" and "by eye" will please only until the first fine from the supervisory authorities.
There are two ways to acquire this document - purchase a ready-made one, which will be made to order for you, or withdraw it yourself. The first is frankly expensive, and the second is not difficult, which we will prove below.
Example
Menu item name: Kiev cutlet.
Technological map number 47.
Dishes: roast.
Expected yield of the finished dish (serving size): 310 grams.
Layout of products per 100 grams of the finished dish:
- peeled chicken fillet - 29.82 grams;
- butter - 14 grams;
- chicken egg - 3.27 grams;
- bread made from flour premium- 8.88 grams. The expected weight of the semi-finished product at the exit is 50.35 grams;
- for roasting - 5.21 grams;
- bean garnish (technological card No. 741) or potato (technological card No. 42) - 52.08 grams.
dishes, its chemical composition and calorie content, recipe
Chopped chicken fillet stuffed butter, dipped in eggs, breaded twice in ground white bread, deep-fried for about 6-7 minutes until a deep golden crust is formed. Spread on a baking sheet and bring to readiness at a temperature of 200-220 ° C in the oven. Products are optionally served on heated toast. The default garnish is bean or vegetable.
Purchase prices for products
An item without which it is impossible to display the calculation of a dish in the dining room. Ideally, you should add transport costs to them if the raw materials are brought not by the supplier, but by you yourself, through transport companies or on your own. Also consider the funds spent on loading / unloading, if these services are paid separately.
Counting principle
With the above information in hand, the matter remains small.
It is necessary to indicate the name of the dish, on the basis of the technological map, put down the products that are required, in the right quantity, indicate the derived purchase prices and sum up. That's all, you got the cost price of the dish.
Let's move on to practice
Calculation of the dish (example - the same Kiev cutlet, we take the average prices for the capital):
- peeled chicken fillet - 29.82 grams, where 1000 grams costs 180 rubles;
- manufactured in accordance with GOST) - 14 grams, where 1000 grams costs 240 rubles;
- chicken egg - 3.27 grams, where 1000 grams costs 120 rubles;
- bread made from premium flour - 8.88 grams, where 1000 grams costs 60 rubles;
- for roasting - 5.21 grams, where 1000 grams costs 80 rubles;
- bean garnish (technological card No. 741) or potato (technological card No. 42) - 52.08 grams, where 1000 grams costs about 50 rubles.
As a result, we get:
- chicken fillet, peeled from skin and bones - 5.37 rubles;
- butter (real, made according to GOST) - 3.36 rubles;
- chicken egg - 0.4 rubles;
- bread made from premium flour - 0.54 rubles;
- cooking fat for frying - 0.42 rubles;
- bean garnish (technological card No. 741) or potato (technological card No. 42) - 3.12 rubles.
Thus, we get a calculation of a dish in the dining room "Cutlet in Kiev": the cost of 100 grams of a serving is 13 rubles 20 kopecks.
By the same principle, a calculation is made of all items prescribed in the menu, including side dishes, desserts and drinks.
Of course, prices are unstable, and manually rewriting the cost from time to time is at least irrational, so you can create dish templates in any program that allows you to count, at least the same Microsoft Excel. Just drive in the components, write down the calculation formula and adjust the purchase price when it changes.
If you plan to implement automated accounting, then everything is elementary here - almost all trading programs "sharpened" for systems Catering, have the option "calculation of dishes". Moreover, it is revealed not only in the possibility of posting the actual purchase price of the ingredients in the relevant lines - they also carry out, in real time, movement and write-off. Thanks to this, you can always track step by step where, figuratively speaking, "2 kilograms of oil have disappeared."
Practical use
As mentioned earlier, the calculation of the costing at the moment only indirectly affects its selling price, since the latter is formed under the influence of a number of characteristics, including the average for the market, the resources spent on other menu items, as well as such banal needs , as ensuring the full functioning of the dining room. The latter indicates the level of prices that must be maintained for the profitability of the enterprise in general.
By and large, it is the dining room that is a fairly profitable enterprise, since the standard list of dishes, which is usually honored by such establishments, is distinguished by a frankly low purchase price without losing its useful qualities. Relatively speaking, the preparation of the same vinaigrette or pickle takes a minimum of funds, and the people's love for them is close to the concept of "eternity". The calculation of dishes is able to show the organization's accounting department how profitable certain items of the assortment are, whether it is necessary to introduce something new or, on the contrary, remove dishes that do not pay for themselves.
Any catering establishment is required to have technological cards - this is required by law. Today we will tell you: what are technical maps, what they are and how to automate work with technological maps.
What is a technological map
In general, a worksheet is a document containing information about the ingredients of a dish and how it is prepared. It contains the following information:
- the number and name of the products that make up the dish;
- recipe;
- rules of registration and submission.
The procedure for compiling, maintaining and storing technological maps is regulated by GOST 31987-2012 “Public catering services”. This document is mandatory for use in all catering establishments, regardless of the form of ownership. Failure to comply with this requirement threatens with penalties in accordance with the Code of Administrative Offenses of the Russian Federation.
Sample flow sheet
What are technological maps
Simple technological map - TK
Starts on dishes prepared according to standard recipes. Such recipes are listed in culinary guides and approved by the relevant GOSTs. In this case, simplified requirements are applied to the document: only the composition and recipe are indicated. At the request of the organization, you can specify the nutritional value. Important point: the source of the recipe must be indicated in the TC. This may be a link to a reference book or GOST, from which it was taken.
Simple shopping malls serve to ensure that catering companies do not reinvent the wheel every time. It makes no sense to develop in each dining room its own own recipe boiled potatoes - this process is template. The rules for issuing a shopping mall according to a simplified scheme are specified in GOST 31987-2012 “Catering Services”.
Technical and technological map - TTK
But here everything is more complicated. Such a document is developed for each new dish that is not in any reference book. There is much more information here. The TTC must include:
- name of the organization that developed the technical and technological map;
- application area. In this paragraph, a list of catering establishments is written that can use the recipe at home;
- raw material requirements. It indicates the list of accompanying documents, security confirmation, and so on;
- name and quantity of ingredients;
- the total mass of the dish at the exit. During cooking or heat treatment, dishes may lose some of their weight - this must be taken into account;
- full description of the technological process. Everything is taken into account: from the methods of cutting products to the time of heat treatment. For each typical process, you must specify a link to GOST or the regulatory document according to which it is carried out. For imported products, their own recommendations are used;
- requirements for the design and rules for serving dishes, as well as storage conditions;
- quality and safety parameters. This paragraph describes appearance, the nutritional value of the dish, its taste and smell.
TTK is developed by a responsible person and approved by the head of the catering establishment.
Technical and technological map of Greek salad
TK and TTK must be printed out, have live signatures with seals and be stored in an accessible place. They must be presented at the request of the inspection authorities.
Below you can download samples of technical sheets for some dishes and drinks:
Technological maps are compiled not only for catering products, but also in any other area where products are made from any raw material.
Technological cards and inventory systems
Try all the features of the EKAM platform for free
Privacy agreement
and processing of personal data
1. General Provisions
1.1. This agreement on confidentiality and processing of personal data (hereinafter referred to as the Agreement) is accepted freely and by its own will, applies to all information that Insales Rus LLC and / or its affiliates, including all persons belonging to the same group with LLC "Insales Rus" (including "EKAM Service" LLC) can obtain about the User during the use of any of the sites, services, services, computer programs, products or services of "Insales Rus" LLC (hereinafter referred to as the "Services") and in during the execution of Insales Rus LLC of any agreements and contracts with the User. The User's consent to the Agreement, expressed by him in the framework of relations with one of the listed persons, applies to all other listed persons.
1.2. The use of the Services means the User's consent to this Agreement and the conditions specified therein; in case of disagreement with these conditions, the User must refrain from using the Services.
"Insales"- Limited Liability Company "Insales Rus", PSRN 1117746506514, TIN 7714843760, KPP 771401001, registered at the address: 125319, Moscow, Akademika Ilyushin St., 4, building 1, office 11 (hereinafter referred to as "Insales" ), on the one hand, and
"User" -
or an individual who has legal capacity and is recognized as a participant in civil legal relations in accordance with the legislation of the Russian Federation;
or a legal entity registered in accordance with the laws of the state of which such entity is a resident;
or an individual entrepreneur registered in accordance with the legislation of the state of which such person is a resident;
which has accepted the terms of this Agreement.
1.4. For the purposes of this Agreement, the Parties have determined that confidential information is information of any nature (production, technical, economic, organizational and others), including the results of intellectual activity, as well as information about the methods of carrying out professional activities (including, but not limited to: information about products, works and services; information about technologies and research works; data on technical systems and equipment, including software elements; business forecasts and information about proposed purchases; requirements and specifications of specific partners and potential partners; information, relating to intellectual property, as well as plans and technologies related to all of the above) communicated by one party to the other party in written and / or electronic form, expressly designated by the Party as its confidential information.
1.5. The purpose of this Agreement is to protect confidential information that the Parties will exchange during negotiations, conclusion of contracts and fulfillment of obligations, as well as any other interaction (including, but not limited to, consulting, requesting and providing information, and performing other assignments).
2.Obligations of the Parties
2.1. The Parties agree to keep secret all confidential information received by one Party from the other Party during the interaction of the Parties, not to disclose, disclose, make public or otherwise provide such information to any third party without the prior written permission of the other Party, with the exception of cases specified in the current legislation, when the provision of such information is the responsibility of the Parties.
2.2. Each Party will take all necessary measures to protect confidential information at least with the same measures that the Party applies to protect its own confidential information. Access to confidential information is provided only to those employees of each of the Parties who reasonably need it to perform their official duties for the implementation of this Agreement.
2.3. The obligation to keep secret confidential information is valid within the term of this Agreement, the license agreement for computer programs dated 12/01/2016, the agreement of accession to the license agreement for computer programs, agency and other agreements and within five years after termination their actions, unless otherwise agreed by the Parties.
(a) if the information provided has become publicly available without violating the obligations of one of the Parties;
(b) if the information provided became known to the Party as a result of its own research, systematic observations or other activities carried out without the use of confidential information received from the other Party;
(c) if the information provided is lawfully obtained from a third party without an obligation to keep it secret until it is provided by one of the Parties;
(d) if the information is provided at the written request of a public authority, other state authority, or local government in order to perform their functions, and its disclosure to these authorities is mandatory for the Party. In this case, the Party must immediately notify the other Party of the request received;
(e) if the information is provided to a third party with the consent of the Party about which the information is being transferred.
2.5. Insales does not verify the accuracy of the information provided by the User, and is not able to assess its legal capacity.
2.6. The information that the User provides to Insales when registering in the Services is not personal data, as they are defined in the Federal Law of the Russian Federation No. 152-FZ of July 27, 2006. "About personal data".
2.7. Insales has the right to make changes to this Agreement. When making changes in the current version, the date of the last update is indicated. The new version of the Agreement comes into force from the moment of its placement, unless otherwise provided by the new version of the Agreement.
2.8. By accepting this Agreement, the User acknowledges and agrees that Insales may send personalized messages and information to the User (including, but not limited to) to improve the quality of the Services, to develop new products, to create and send personal offers to the User, to inform the User about changes in the Tariff plans and updates, to send marketing materials to the User on the subject of the Services, to protect the Services and Users and for other purposes.
The user has the right to refuse to receive the above information by notifying in writing to the e-mail address Insales - .
2.9. By accepting this Agreement, the User acknowledges and agrees that the Insales Services may use cookies, counters, other technologies to ensure the operation of the Services in general or their individual functions in particular, and the User has no claims against Insales in connection with this.
2.10. The user is aware that the equipment and software used by him to visit sites on the Internet may have the function of prohibiting operations with cookies (for any sites or for certain sites), as well as deleting previously received cookies.
Insales has the right to determine that the provision of a certain Service is possible only if the acceptance and receipt of cookies is allowed by the User.
2.11. The user is solely responsible for the security of the means chosen by him to access the account, and also independently ensures their confidentiality. The User is solely responsible for all actions (as well as their consequences) within or using the Services under the User's account, including cases of voluntary transfer by the User of data to access the User's account to third parties under any conditions (including under contracts or agreements) . At the same time, all actions within or using the Services under the User's account are considered to be performed by the User himself, except for cases when the User notified Insales of unauthorized access to the Services using the User's account and / or any violation (suspicions of violation) of the confidentiality of their account access.
2.12. The User is obliged to immediately notify Insales of any case of unauthorized (not authorized by the User) access to the Services using the User's account and / or any violation (suspicion of violation) of the confidentiality of their means of access to the account. For security purposes, the User is obliged to independently carry out a safe shutdown of work under his account at the end of each session of work with the Services. Insales is not responsible for the possible loss or corruption of data, as well as other consequences of any nature that may occur due to the violation by the User of the provisions of this part of the Agreement.
3. Responsibility of the Parties
3.1. The Party that violated the obligations stipulated by the Agreement regarding the protection of confidential information transmitted under the Agreement is obliged to compensate, at the request of the affected Party, the real damage caused by such a violation of the terms of the Agreement in accordance with the current legislation of the Russian Federation.
3.2. Compensation for damages does not terminate the obligations of the violating Party for the proper performance of obligations under the Agreement.
4.Other provisions
4.1. All notices, requests, demands and other correspondence under this Agreement, including those including confidential information, must be made in writing and delivered personally or through a courier, or sent by e-mail to the addresses specified in the license agreement for computer programs dated 12/01/2016, the agreement of accession to the license agreement for computer programs and in this Agreement or other addresses that may be further specified in writing by the Party.
4.2. If one or more provisions (conditions) of this Agreement are or become invalid, then this cannot serve as a reason for the termination of other provisions (conditions).
4.3. The law of the Russian Federation shall apply to this Agreement and the relationship between the User and Insales arising in connection with the application of the Agreement.
4.3. The User has the right to send all suggestions or questions regarding this Agreement to the Insales User Support Service or to the postal address: 107078, Moscow, st. Novoryazanskaya, 18, pp. 11-12 BC "Stendhal" LLC "Insales Rus".
Publication date: 01.12.2016
Full name in Russian:
Limited Liability Company "Insales Rus"
Abbreviated name in Russian:
Insales Rus LLC
Name in English:
InSales Rus Limited Liability Company (InSales Rus LLC)
Legal address:
125319, Moscow, st. Academician Ilyushin, 4, building 1, office 11
Mailing address:
107078, Moscow, st. Novoryazanskaya, 18, building 11-12, BC "Stendhal"
TIN: 7714843760 KPP: 771401001
Bank details:
You have decided to open a catering business and succeed in this difficult
market? Want to cook tastier than your competitors? Then without a unique
you can't do without dish cards to order.
The technological map of dishes is your assistant:
- in the struggle for the hearts and wallets of visitors;
- in protection against production errors;
- in reduction of unreasonable expenses.
This is the basis and guarantee of correct conduct. restaurant business, receiving a stable income from customers, no problems with the sanitary and epidemiological station. The card is supplied with all normative and technological features of preparation. It includes not only the components of the recipe, but also the characteristics of semi-finished products, ingredients and the finished dish.
To understand who can be entrusted with the manufacture of TTK, let's define the terms.
Technological map or Techno-technological map?
What are their similarities and differences?
The technological map is:
- A document that is compiled on the basis of recipes from collections for the public
supply, or developed from scratch.
- The first page of the technical and technological map, that is, information about the dish without
food instructions and energy value.
Technical and technological mapis a development for specialty of the house which will be on the menuonly in your establishment.
The main sections of the Technical and Technological Map, as the main document at enterprises
catering with original menu, are shown in the table:
|
Chapter |
Meaning | Example |
|
Name |
The exact name of the dish |
This TTK describes a dish (product) |
|
List of raw materials |
All types specified |
Name of raw materials and used |
|
Requirements for |
Compliance is noted |
food raw materials, |
|
Weight norms |
Indicated in |
Semi-finished product output, g: 184, |
|
Description |
This includes the division |
Clean vegetables and cut into strips. |
|
Requirements to |
According to GOST and |
Procurement of raw materials is carried out according to the technological recommendations for imported raw materials and the proposals of the Collection of technological standards for a public catering enterprise. In terms of shelf life, products are guided by SanPiN 2.3.2 1324-03. |
|
Indicators |
Describe color, taste, |
The meat is moderately fried, color |
|
Energy |
Must be specified |
1 serving (160 grams) contains - proteins |
|
Number, date, term |
Each technological |
Technical - technological map No. |
Collection of recipes for dishes and its addition
It is necessary to mention one more concept that coexists peacefully with TC and TTC -
food recipes. This contains information about the components and technological process
cooking. The recipe does not contain a source, conditions, terms of implementation, food
values and needs to be supplemented by a technical and technological map developed
specialist.
If a situation arises when the available collections of recipes do not contain the necessary
you an element, then you need to work out the dish. It means:
1. Cooking a new dish repeatedly to accurately determine the rate
necessary products.
2. Drawing up an act of working off.
3. On the basis of paragraph 2, the formation of a technological map and its approval.
In the absence of a full-time technologist at a public catering enterprise,
technical and technological map, you should contact a professional, this will allow:
1. Reduce financial investments in menu optimization.
2. Pre-evaluate the benefits of selling each dish.
3. Save on a regular technologist.
4. Use a wide range of products.
And most importantly, a well-composed TTC will allow you to avoid fines for the lack of
technological documents that comply with the norms of the legislation on the organization and
operation of catering establishments.
NEW SERVICE
RENT PROGRAM MASTER TTK
Then you need to add raw materials to the recipe, indicate the weight of the semi-finished products (if any) and enter the yield of the dish. After that, the user performs actions by successively clicking on the tabs
Development of TTK (Fig. 2)
The whole process of development and calculation of TTC takes only 10-15 minutes. The finished technical and technological map is printed.
Technical and technological map (sample for public catering) fig. 3
Working with routings
To calculate and design flow charts, the user opens the flow chart journal and selects a recipe for a dish (product). Then the yield of the dish and the number of servings are indicated. After the technological map is printed.
Technological map (Fig. 4)
When calculating the technological map, it is possible to change the output of a dish with automatic recalculation of the norms for laying gross raw materials. Recalculation of bookmark rates for seasonal types of raw materials (potatoes, carrots and beets) is carried out automatically depending on the season. Technological maps are stored in the TC log.
After specifying the output of a dish, an Information Sheet is automatically created for the technological map, in which the nutritional and energy value and the content of vitamins and minerals for the output of the dish are calculated.
Information sheet (Fig. 5)
Menu-requirement development
For companies organizing school meals, the program provides for the development of menu-requirements. To compose a menu-requirement, the user presses the MT button in the toolbar. The requirements-menu log opens.
Menu-requirement log (Figure 6)
When creating a new demand menu, the user specifies the age group, the number of those satisfied, the number of the day in the ten-day menu, etc.
Menu-requirement settings (Fig. 7)
Then the user opens the menu plan and selects an assortment set of dishes for the day, indicating the output of the dishes and the name of the meal.
Choice of dishes (Fig. 8)
When adding dishes, the distribution of the daily ration by meals as a percentage and the fulfillment of the total daily ration are automatically analyzed. In the event that the norm is met, the plan / fact column is highlighted in green, if not, in red.
Analysis of the distribution and implementation of the daily ration (Fig. 9)
After the selection of dishes is completed, all documents are created and printed out automatically.
Menu (Fig. 10)
Information sheet (Fig. 11)
Calculation card (Fig. 12)
Requirement-invoice (Fig. 13)
Menu plan development
To draw up a menu plan, the user presses the PM button in the toolbar.
Menu plan log (Fig. 14)
In the settings window, the user enters the name of the menu plan and the due date.
Menu plan settings (Fig. 15)
Then you need to open the menu plan and select an assortment set of dishes.
Choice of dishes (Fig. 16)
After the selection of dishes is completed, all documents are created automatically.
Menu plan (Fig. 17)
Calculation card (Fig. 18)
Requirement-invoice (Fig. 19)
Calculation of the diet menu plan (Fig. 20)
Preparation and calculation of the menu
The Master TTK 2.0 program also provides for the preparation and calculation of the menu with the calculation of the nutritional and energy value and the cost of dishes.
Menu (Fig. 21)
To combine the work of the program "Master TTK" 2.0 with accounting programs, a Data Export Module has been developed, which is designed to upload data to the .xls format
System requirements:
The program has local and network versions
Operating system: Windows 7/8/10
Processor: at least Intel Pentium2 266MHz
RAM: 128MB
Screen resolution: at least 1024 x 768
Free hard disk space: 50MB
Price: 14900.00
Organization:
LLC "Obschepit" of the Krasnoarmeisky district police department 10.09.2007
Contact:
Bardasova Lyudmila Leonidovna, director
Organization:
JSC Hotel "Ob", Novosibirsk. 03.11.2006
The computer program "Master TTK" has been used at our enterprise for a little more than six months. Technologists mastered it very quickly and now they can not only get a ready-made technical and technological map in just 10-15 minutes, but also automatically draw up a menu plan with the calculation of a summary sheet of raw materials, calculation cards, food rations.
Despite the short period of time, we managed to significantly improve the technological issues. During this time, we changed the menu three times and for all dishes we ourselves developed technical and technological cards with the calculation of physical chemistry, caloric content and indication of microbiology. Now at the workplaces of cooks there are not only technological cards, but also colorful photographs of decorated ready-made dishes. And the cooks are comfortable, and the inspectors are delighted!
But most importantly, we managed to optimize the investment and loss rates, taking into account the use of a combi steamer and new types of raw materials. At the same time, the cost of dishes has significantly decreased and the situation with the safety of inventory items in production has improved: after all, all recipes are not taken from collections, but are compiled on the basis of control tests, which are very easy to perform in the program. In my opinion, the cost of the program is incomparable with the economic effect of its application.
Contact:
Melnikov Sergey Petrovich, director of the food service
Organization:
Novosibirsk State Technical University December 28, 2006
Two years ago 2004 computer programs for technologists, developed by the Novosibirsk company "Expert Soft", aroused great interest among teachers of the Department of Technology and Organization food production Novosibirsk State Technical University. Today, catering establishments and Food Industry need qualified, well-trained specialists with new knowledge and modern information technologies. That is why the computer programs "Master Technologist" are successfully used by our department in the process of preparing students and improving the skills of specialists in the food industry and public catering. The department is equipped with a computer class where these programs are installed. During course preparation, theses During practical training, students independently draw up production programs, accounting records and the movement of raw materials, calculate TTC, draw up technological instructions, quality certificates, calculate rations, etc. Working with programs is easy and quite interesting. Specialists have the opportunity to further systematize and update the knowledge gained, since the programs are developed on the basis of existing reference books on commodity science, food technology, standardization, etc. But the most important thing is correctly calculated and flawlessly executed technological standards, according to which it is possible not only to certify products, but also to optimize the production processes of a real enterprise. In addition, the "Master Technologist" program has been introduced into the practical activities of the canteen of the sports and recreation camp "Sharap" of NSTU, which is the base for the practice of students studying in the specialty 260501 - Technology of public catering products. The department, for operational planning of production with the help of a computer, appoints a student of the 4th or 5th year, together with the head of practice, develops a planned menu, plan-menu, tasks for procurement and pre-preparation workshops, which are issued to students by performers. The introduction of information technologies into the educational process and the practical activities of enterprises is a new step in intensifying production processes to improve the quality of culinary products, the main factor of which is the development and implementation of NTD (normative and technical documentation.
Contact:
Glavcheva S.I., Head. department, candidate of economics. Sciences, Corresponding Member. Academy of Quality Problems of the Russian Federation
Organization:
Restaurant Japanese cuisine"Sushi Yama", Novosibirsk, December 28, 2006
The Master TTK program really justifies its purpose. With its help, you can quickly bring all the necessary technological documentation into the proper form. As for the physical and chemical parameters and nutritional value dishes that are calculated automatically in the program, I can say that the data calculated in the technical and technological maps that were compiled by me completely coincided with the data of the analysis carried out by a special laboratory, and the inspection bodies never had any complaints about the technological documentation.
Contact:
Nikolai Ilyin, chef
Organization:
SANEXPERT LLC, St. Petersburg
A month ago, we rented the TTK Master program, because. wanted to learn more about the program developed by the Novosibirsk company "Expert Soft".
There are several other companies on the market offering similar programs for technologists, but Master TTK suited us more, both in terms of functionality and price.
Convenient interface, prompt technical support and price were decisive factors for us. In the future, we plan to purchase a version for permanent use.
Contact:
General Director Vorobyov Evgeniy Viktorovich
Organization:
Neotrade LLC, Togliatti
I have been using the Master TTK program for 10 years. Great assistant, very convenient and reliable program. Everything is automated, the main thing is the convenient input of recipes.
My TTCs in our Samara region are among the best. And this is largely due to the program. I used both Plans-menu and Menu-requirements, it is very easy and convenient to work. And, most importantly, quickly. I am very pleased! And the staff is satisfied, all applications are quickly printed with bookmarks for the ordered quantity, you don’t need to calculate anything yourself.
Contact:
Deputy Director for Production Aleshina Irina Viktorovna
